Can't burn, 6 cd's lost please help!

[quaked2023]

Hello!

I habe a big problem, i can't burn, every time i trie to burn, i get the same error "Cound not perform session fixation" and it stops.... i've lost 6 cd's because of this error, and every forum that i go it says that maybe it's a hardware problem, i've already cleaned the lents... but no luck my cd burner is a Memorex 52XMAX....


Please can you help me???

Thanks in advance!

-The Only Privacy Left Is The Inside Of Your Head!- QUAKED2023

 

[felixc]

Have you tried with a CD-RW, formatted as a rewritable divice, if it works correctly in this mode? You can also use the CD-RW to do tests as a normal CD.

What is your system? Operating system, CPU speed?

Have you tried sutting down all unneeded applications, inculding the ones running inbackground?

 

[quaked2023]

Hi! felixc... my OS is Windows 2000 and i have a pentuim 3 800 MHz... the problem started today, ii was burning fine yesterday.. i'm using nero burning rom, you thik that maybe if i change to an other burning software i might be able to burn?. Oh and i don't have any CD-RW

-The Only Privacy Left Is The Inside Of Your Head!- QUAKED2023

 

[quaked2023]

I've just tried to burn an other cd.. but this time i chose the simulation mode, and there was an error in there too it just said write error and taht's it... by the way her is the log from an the first error:

Mr. Fargas
2023 Creations
1A23-0084-4030-1921-1263-8301

Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 20/12/2003 07:26:58 p.m.
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 06:18:06 p.m.
Nero version: 6.3.1.6
Recorder: <Memorex 52MAX 325216AJ> Version: NWK1 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITEON CD-ROM LTN486S >Version: YUS3 - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Memorex 52MAX 325216AJ atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITEON CD-ROM LTN486S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
Memorex 52MAX 325216AJ E: CDRom0
LITEON CD-ROM LTN486S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (522672kB)
Free physical memory: 137MB (140808kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.11.2004
CD-ROM (ISO)
06:17:08 p.m. #1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

06:17:08 p.m. #2 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

06:17:08 p.m. #3 Text 0 File Reader.cpp, Line 118
Reader running

06:17:08 p.m. #4 Text 0 File Writer.cpp, Line 124
Writer Memorex 52MAX 325216AJ running

06:17:08 p.m. #5 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

06:17:08 p.m. #6 Text 0 File Burncd.cpp, Line 3198
Turn on Track-at-once, using CD-R/RW media

06:17:10 p.m. #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 359209 ( 79:51.34)

06:17:10 p.m. #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

06:17:10 p.m. #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: Memorex 52MAX 325216AJ;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

06:17:10 p.m. #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

06:17:10 p.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 359210 (359210) = #359210/79:49.35
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359208 blocks [Memorex 52MAX 325216AJ ]
--------------------------------------------------------------

06:17:10 p.m. #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [Memorex 52MAX 325216AJ ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735969280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
359210 | lead-out | 1 | 0x00 | 0x41

06:17:10 p.m. #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 359210 -> 359208.

06:17:10 p.m. #14 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

06:17:10 p.m. #15 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

06:17:10 p.m. #16 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

06:17:10 p.m. #17 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 48x (7,200 KB/s)

06:17:10 p.m. #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

06:17:10 p.m. #19 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

06:17:25 p.m. #20 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AC90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x04 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

06:17:25 p.m. #21 CDR -1135 File Writer.cpp, Line 304
Write error

06:17:25 p.m. #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

06:17:25 p.m. #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

06:17:26 p.m. #24 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
Memorex 52MAX 325216AJ\H1 T0

06:17:26 p.m. #25 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack

06:17:26 p.m. #26 Text 0 File Mmc.cpp, Line 14708
<Memorex 52MAX 325216AJ > start Close Session

06:17:27 p.m. #27 SCSI -1176 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

06:17:27 p.m. #28 CDR -1176 File WriterStatus.cpp, Line 245
Session fixation error

06:17:27 p.m. #29 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

06:17:27 p.m. #30 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

06:17:27 p.m. #31 Text 0 File Mmc.cpp, Line 14708
<Memorex 52MAX 325216AJ > start Close Session

06:17:27 p.m. #32 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

06:17:27 p.m. #33 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 48x (7,200 KB/s)


Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 27/08/2004 08:31:22 p.m.
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 27/08/2004 08:31:22 p.m.
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 20/12/2003 07:26:57 p.m.
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 02:02:00 a.m. (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86672 bytes, created 18/06/2003 04:00:00 a.m. (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

-The Only Privacy Left Is The Inside Of Your Head!- QUAKED2023

 

[mainegeek]

Try re-installing your Nero software.

 

[torturedmind]

when did this happen? what are the things you did (installed/tweaked/etc.) before this happen? maybe we can work things backward.

as a side not, i too had the same problem several months back. it turned out that my external cd writer won't burn any cd's if my anti-virus and personal firewall were both running. so what i did was disconnect my pc from the network and unloaded both apps. everything went smoothly from then on.

peace!

kilroy
philippines

"If the automobile had followed the same development cycle as the computer, a Rolls-Royce would today cost $100, get one million miles to the gallon, and explode once a year, killing everyone inside."

 

[quaked2023]

Hey torturedmind i think you've hit the jackpot!, yesterday i installed Norton Anitvirus 2005 and have my personal firewall running (both apps at the same time) i'll try to burn with out those apps running....

-The Only Privacy Left Is The Inside Of Your Head!- QUAKED2023

 

[micker377]

I just (last week) had to restore from a back up image because Norton 2005 ^%%#'d up my system! The image put 2003 back in which works OK. The problem with 2003 is, last time I had a problem, Symantec said the only cure is to upgrade to the new version, as any version before 2004 is no longer supported (live update no longer works right - have to d/l signatures manually).

 

[quaked2023]

what did norton do?... you know i've heard that kapersky antivirus is a better antivirus than norton

-The Only Privacy Left Is The Inside Of Your Head!- QUAKED2023

 

[TekTippy4U]

try this;
Determine maximum speed : FALSE (change to TRUE)
Simulate : FALSE (TRUE)
Write : TRUE
Finalize CD : FALSE (TRUE)

Disable the Nero AV plugin in Preferences >> General tab

The error;

06:17:25 p.m. #20 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AC90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)

is a common one - but may have diff fixes - BTW Keep using Nero, you'll just end up complicating things further

TT4U

Notification:
These are just my thoughts....and should be carefully measured against other opinions.
Backup All Important Data/Docs

 

[luspr]

If installing Norton seems to have caused the problem it could simply be a case of not enough system resources to complete the burn procedure

Try switching off a few back ground processes from the task manager

If you ever upgrade to XP you can always use the cd burning option from there too if you get problems with Nero et al...

 

[felixc]

I asked if you tried shutting down every other application that you have running in your system. This is because all the background tasks do eat a lot of the CPU resources. With a Pentium 3 at 800MHz, Win2K is already a huge load on a PC. (WinXP would be worse) Norton is known to be a power hog, in addition to a lot of other problems. Internet link, antivirus, firewall, spyware. Turn them off before using your writer. These tasks are taking CPU instructions that take too long to execute concuirrently with the CD-ROM burning software, which needs some real-time performance.

I had a K6-550 with an old HP 4X burner and Win98. The only way to get it to burn properly was to remove all the background apps.

 

[norty303]

Over the years i've had so much trouble with Norton & Mcafee, and spent money on keeping them up to date. The most satisfactory Antivirus I've found is AVG and it's free. Coupled with Sygate personal firewall (also free) my system is stable and doesn't suffer anywhere near the number of incompatibilities that other commercial software did.

 

[TekTippy4U]

good combo there norty

TT4U

Notification:
These are just my thoughts....and should be carefully measured against other opinions.
Backup All Important Data/Docs

 

[quaked2023]

hey you guys, i unistalled norton from my pc, and shut down every process in the background... and still no luck now i get an other error that says "coud not perform endtrack"... of curse i'm using the simulation mode, i'm not risking any more cd's.... but since last week i've noticed that my pc i very slow..... and now that i've unistalled norton i have 2 msn messenger in the task bar, internet explorer takes a lot of time to load a web page (and i have dsl)... so you think that maybe i have a virus?

Thanks!

-The Only Privacy Left Is The Inside Of Your Head!- QUAKED2023

 

[TekTippy4U]

Faq760-3862 and Faq608-4650
hth

TT4U

Notification:
These are just my thoughts....and should be carefully measured against other opinions.
Backup All Important Data/Docs