We are building a new hub site, and adding a new satellite site. I have an Opt 11 with a DID PRI, and TIE PRI to satellite. I use IDC yes and DCNO 1 to receive the incoming 4 digits. I know the numbers arrive at the hub site ( using D-channel msging). I cannot place a call from the hub site to the satellite. We use AC2 and LOC codes. Incoming calls over DID trunks can be routed via IDC to a local extension at the hub, or via ACD to remote Call Pilot, but not to the satellite. I have LOC built in LD 90, and HLOC built at satellite. I'm pretty sure I have CLID correct at satellite.
I can call over the same trunks from the satellite to anywhere. I am afraid I am baffled. Spent too much time staring at RDB and RLB.
I can post configs later if it'll help.
I can call over the same trunks from the satellite to anywhere. I am afraid I am baffled. Spent too much time staring at RDB and RLB.
I can post configs later if it'll help.