Can't access .cfm files thru Cold Fusion Studio

[ketankshah]

I have recently installed CF Server as well as Studio. I have managed to setup the "Allaire FTP & RDS settings" in the file tab for the local drive and also the development settings for the same. I can successfully access the .cfm files on my local drive and can browse them thru the studio as well as can access the database.

The problem is that I have uploaded the same application on a site and am not been able to see the files. I have the following settings.

Host name is "ftp.cfm-resources.com";
Actual URL is "

http://www.cfm-resources.com/j/jac";.

When I connect thru WSFTP Pro, the default path of my files is "/f:/j/jac".

I have given the following settings.

In the "Allaire FTP & RDS settings" I have provided
Host name - "ftp.cfm-resources.com" ( this is what I use in connecting thru WSFTP)
Port - 21
My RDS userid and password.

At this point, if the settings are correct then it should me the files on the server. But it is not showing me any files, in fact it is not getting connected to that server.

What is wrong in my settings ? Can someone help in this regards ?

Also someone can tell me what should be the development mapping here?

Ketan

 

[iqof188]

I presume your are not a paying member for cfm-resources. If you are not, they won't allow RDS in CF. The only way you can get your files on their server, is to use FTP through the FTP client. They simply turned off RDS for non-paying members.
Good luck on your website...

<webguru>iqof188</webguru>