Cannot register MSFLXGRD.OCX with Regsvr32

[Louppp]

Hi, back in Oct 2006 cjashwell asked about registering MSFLXGRD. abaldwin replied: abaldwin (Programmer) 26 Oct 06 14:45
There are three parts to the msflxgrd.ocx

msflxgrd.dep
msflxgrd.oca
msflxgrd.ocx

I would start by copying all three files to the system32 folder and then at the command prompt type

regsvr32 msflxgrd.ocx and see if it registers then.

I am having trouble finding msflxgrd.dep msflxgrd.oca I've installed .ocx and registered it, but when I run my program I get a "Run-time error 339" component msflxgrd or one of its dependencies not correctly registered: a file is missing or invalid.

I have Windows XP Home. Any help would be appreciated.

 

[johnwm]

Hi and welcome to Tek-Tips. To get the most from these forums please read faq222-2244 carefully

You should find all the bits you need in the MSFlxGrd.CAB file on your original installation CD. You will get the current updates to it as part of SP6 which you can get here:

http://www.microsoft.com/downloads/...db-2e89-4676-a16a-5c5477cb9713&DisplayLang=en

___________________________________________________________
If you want the best response to a question, please check out FAQ222-2244 first.
'If we're supposed to work in Hex, why have we only got A fingers?'
Drive a Steam Roller
Steam Engine Prints

 

[Louppp]

Hi, in the future I'll try to be more diligent in researching, but the info you supplied helped me out tremendously, its what I needed to make things work.

Thanks