Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cannot ping outside of PIX 515

Status
Not open for further replies.

Helfenmir

MIS
Sep 17, 2001
61
GB
Hi

This is all bit new to me.

Cannot Ping the outside address of firewall or the router that is attached to it. Both are in the same network. The inside is in a different network. The nat is set to 1 0 0
Any ideas would be great.

All I have is a ISDN dial-on-demand router for a few users at a remote site. I just want to put the firewall between the router and the rest of the domain and prevent possible access from the outside world (Internet) when connected, and limit the use of functionality to users ie ftp, hotmail (of which I do not know the port number) and certain Internet sites etc. etc. The bosses orders not mine.

Incidently can hotmail attachements be blocked or scanned.

Thanks
Helfenmir



 
You need to permit pinging in your access-list

access-list 101 permit icmp any any

This should allow your users to ping the outside.

J
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top