Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cannot access outside lines on hybrid ext.

Status
Not open for further replies.
Vurk4

Vurk4

MIS
Aug 13, 2001
83
US
I know it's probably something simple, but we were have a problem with an extention randomly forwarding so we removed and recreated the extention but now have no outside line access.
 
Sort by date Sort by votes
Make sure the station is assigned to a port (not x-ported). Then check the COR assigned to the station.

Put up a trace (list trace station xxxx) and try to make a call. If it fails, paste the results here.

Kevin
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

letman2
  • Locked
  • Question
Removing DSN lines
Replies
0
Views
217
letman2
letman2
tweege
  • Locked
  • Question
IP sets loosing Ext info after Primary CM Failover
Replies
5
Views
470
tweege
tweege
Craft01
  • Question
CM: One-X Communicator cannot register to ESS when it goes active
Replies
11
Views
562
Craft01
Craft01
Nortellian
  • Locked
  • Question
Avaya CM Emergency Location Ext on the Station
Replies
10
Views
1K
ZeroZeroOne
ZeroZeroOne
wallot
  • Locked
  • Question
Avaya CM - ASP130 R6 - KVM Image - Cannot Install Patches
Replies
2
Views
552
wallot
wallot

Part and Inventory Search

Sponsor

Back
Top