Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can only print 133 line screen.
- Thread starter HTCJohn
- Start date
kendevanney
IS-IT--Management
You need to check the printer driver that you are using and have selected in the page setup. Linescreen options will be set by the driver you are using. If 133 is all you are given then maybe try the generic driver or the contact your printer manufacturer
- Thread starter
- #3
Thankyou Kende vanney. I set the driver to generic and I can output any line screen now. There must be some conflict between the two printer setting locations. In the "Page setup" window under "settings" in the "printer description" location I put "generic imagesetter." At the bottom of this screen in the "Printer" prompt I set the printer window there to "Q Accuset 2400" and I am getting the results I needed. Again I say thank you.
- Status
Similar threads
- Locked
- Question