Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MikeeOK on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can I setup a dual PRI on an IPO with dual PRI boards?

Status
Not open for further replies.

trinetintl

Vendor
Mar 15, 2010
730
US
Can I setup a dual PRI with 46 B-channels, 1 D-channel and 1 backup D-channel on an IPO with 2 Universal PRIs? Last night after fighting with the service for a while with continued yellow alarms I finally called the carrier and they told me that our customer had order a dual PRI or a paired PRI instead of 2 single PRI's. Once I received that information my first reaction was telling the customer that the IPO does not support that kind of service, was I right?
Carrier was telling me that had the T1 is up but nothing on the D-channel, setup on IP is standard; NS2, ESF/B8ZS/CPE

RE
APSS - SME
ACIS - SME
 
THe IPO only supports a single pri with 23-b-channels and 1-d-channel per connection.

Not able to support a primary with a backup d
 
Thanks, I just needed the confirmation. AT&T has "re-configured" the service and according to them everything is setup right however I still get busy when I dial in. Because the IPO has no access to the internet, now I have to travel 1 hours to see if AT&T change everything the correct way. Called the customer and he tells me port 9 on the PRI is flashing Red, I just hope a reboot or restarting the PRI will fix the problem.

Thanks,

RE
APSS - SME
ACIS - SME
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top