telephonydave
Programmer
I have had six CallPilot 150 3.1 default in the past three months. All the programming and Key Codes were gone. Has anyone else had this problem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CallPilot 3.1 Defaulting
- Thread starter telephonydave
- Start date
- Status
curlycord
Programmer
The odd time.
try replacing the Power supply if it's a 3 prong....you want 2 prong.
Otherwise software corrupted, power issues or CP unit is defective.
=----(((((((((()----=
curlycord
try replacing the Power supply if it's a 3 prong....you want 2 prong.
Otherwise software corrupted, power issues or CP unit is defective.
=----(((((((((()----=
curlycord
- Thread starter
- #3
telephonydave
Programmer
All have UPS's and 2 prong power supplies. One of them did loose it's programming after lightning strike. I am able to reinstall keycodes and reprogram the CallPilot. They appear to be working fine after reprogramming.
curlycord
Programmer
3.1 comes in 16 buidls....which one? they ALL the exact same?
Latest software version and build is 31.10.31.22
Like the Flash the caps can only take so many power hits until they are no good anymore and cannot hold programming on a power down. Try replcaing just the cabinet and use same software to see.
=----(((((((((()----=
curlycord
Latest software version and build is 31.10.31.22
Like the Flash the caps can only take so many power hits until they are no good anymore and cannot hold programming on a power down. Try replcaing just the cabinet and use same software to see.
=----(((((((((()----=
curlycord
RikRodgers
Vendor
As for a cause, I'd still look at power. Are they all using the same model UPS? Have the KSU's been effected at all?
- Status
Similar threads