Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Calling Party Name Delivery - CS1000 1
- Thread starter exmcier
- Start date
-
1
- #2
- Thread starter
- #3
What I figured. At the mercy of Telco to re-register a single DID. Re-mapping caller ID/ANI works. Re-mapping Calling party name does not. Probably has to do with which NI2 parameter Nortel wants to use versus what parm NI2 requires for transport of calling party name?
If it's Nortel to Nortel you might get it to work but you would have to work closely with your provider. Settings in the D-channel under RCAP might be able to be altered, but once again, doubtful if the carrier will allow it. I have heard of people getting it to work but have no hard evidence. Every carrier is different.
- Status
Similar threads
- Question
