I work in a Hospital, and have tons of 500, and 2000 ports that have no dn's written on them. Our main number 718-963-7272 shows up on all outbound calls. What i want to do is cfw my 3904 to my cell. And call it from an unknown dn , and get the dn im calling from. Can that be set up in my class of service ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CALLER ID 2
- Thread starter toolhead
- Start date
-
1
- #2
-
1
- #3
All a wonderful thought. Short of getting an old DTI Test Phone, this is what one poster did: thread798-1536451
In a pinch, you can call your Call Pilot or MerMail system leaving a message in your mailbox describing where you are, and later retrieve the message, listening to "who called". It isn't as elegant, but it can be done without the help of an operator or other user with display.
--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--
In a pinch, you can call your Call Pilot or MerMail system leaving a message in your mailbox describing where you are, and later retrieve the message, listening to "who called". It isn't as elegant, but it can be done without the help of an operator or other user with display.
--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--
- Status
Similar threads
