I have 2 Definity switches connected with a point to point T-1. All DID's for both switches come into switch #1 with a pri T-1. All incoming DID calls for location #1 show the caller ID info, however all incoming DID calls for location #2 show the trunk name on the display instead of the caller ID. How do I get location #2 to also see the caller ID info.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Caller ID problem
- Thread starter sm21375
- Start date
velcrobomb
IS-IT--Management
The point to point T-1 must also be configured and DCS'd as an ISDN-PRI. Do you experience a small delay when you call over to node 2?
- Status
Similar threads
- Locked
- Question