have a cm 5.2 1 with 2 g650 gateways. DID's come in via pri on a mm710BP board. analog stations are all on either mm716ap or mm711ap boards.
i can see caller id trough a 'list trace' command on every analog station i check, with one exception. it has the same permissions and is on the same board as other analog stations that show caller id. i have tried different station types, including callrID, but still nothing on the list trace. even if i x-port the station, still no caller id on a list trace.
a list trace of the TAC when calling the station also shows no caller id.
carrier says problem has to be in pbx, as they cannot control caller id on an individual trunk in a group of did's.
only difference i can find is that this number is way out of the range of the other did's that we have.
any ideas would be appreciated.
thanks, tim
i can see caller id trough a 'list trace' command on every analog station i check, with one exception. it has the same permissions and is on the same board as other analog stations that show caller id. i have tried different station types, including callrID, but still nothing on the list trace. even if i x-port the station, still no caller id on a list trace.
a list trace of the TAC when calling the station also shows no caller id.
carrier says problem has to be in pbx, as they cannot control caller id on an individual trunk in a group of did's.
only difference i can find is that this number is way out of the range of the other did's that we have.
any ideas would be appreciated.
thanks, tim