Caller ID not being displayed on 2250

[1911]

I have analog and digital sets as well as a 2250. The digital sets will display the analogs numder when called, but the 2250 never display any numder, what could be wrong?

 

[johnpoole]

post the att data

john poole
bellsouth business
columbia,sc

 

[1911]

I don't have access to the system today, but would it be in the att, i.e. Type 2250 data, LD 12?

 

[zunimax]

LD 21
REQ: PRT
TYPE: ATT_DATA
In addition, you may want to print out your LDN_DATA as well. Same overlay, just change the TYPE to LDN.

 

[1911]

I know where to print the info from, I was asking if the problem(s) in programming would likely be in LD 12 or also in LD 95?

 

[zunimax]

Is the problem you're having with the called party not seeing your main number? Or is the 2250's display does not show the number calling?

If it's the display then you'll need to go into LD 15 and change the ATT_DATA and add IDP to your OPT.

If it's the called party can't see numbers displayed from your console then it could be a problem with your LDN_DATA or it could be a CO issue or...

 

[1911]

The 2250 doesn't display any number when I call into it. I'll take a look at LD 15 and check IDP.

Thanks,