Caller ID locking channels in Register state

[dugdstew1]

Hi,

I just put Caller Id on my local line (*ANI*4 digit DNIS).
Now I get locked channels every day. The only way I could find to clear them is to pull the card and reseat it.

<SUSIP:ROU=1,TRU=ALL;
STATUS INFORMATION AT 09:25:40 15JUN07
ROU TRU TYPE TRAFFIC STATE/PTR LINE STATE/PTR ADD INFO
1 001-1 TL45 REGISTER #00EF BUSY #00E8
1 001-2 TL45 PARKED #00EE BUSY #00E9
1 001-3 TL45 IDLE #00ED FREE #00EA
1 001-4 TL45 SPEECH #00EC BUSY #00EB
1 001-5 TL45 REGISTER #00EB BUSY #00EC
1 001-6 TL45 IDLE #00EA FREE #00ED
1 001-7 TL45 IDLE #00E9 FREE #00EE
1 001-8 TL45 IDLE #00E8 FREE #00EF
1 001-9 TL45 IDLE #00E7 FREE #00F0
1 001-10 TL45 IDLE #00E6 FREE #00F1
1 001-11 TL45 IDLE #00E5 FREE #00F2
1 001-12 TL45 IDLE #00E4 FREE #00F3

<rocap:rou=all;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 712001001000001 7 2000000103 0 30 128 03151515 511000020000 001100

Any Ideas?

thanks,
dougstew

 

[whosrdaddy]

to free you lines you can do this :

RFPUI:UNIT=SLP60&TLP60&DTR,LIM=1;
Y;

about your problem, please show RODAP:ROU=1; also...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

Thanks Daddy! HEre is the Rodap.


<RODAP:ROU=1;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 TL45 H'00000003 H'00000005 H'00000003 NO

END

 

[whosrdaddy]

oops, must have been sleeping.

restart command =

RFPUI:UNIT=TLP45&DTR,LIM=1;
Y;



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

Thanks again! Will this kill all the established connections or just the hung up ones?

 

[whosrdaddy]

it will kill ALL connections...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[dugdstew1]

That command works to clear the channel. Thanks! But I still do not know why they get locked in Register state. Any ideas?

 

[whosrdaddy]

are you sure that the configuration of you tieline is correct? I see your route is configured for winkstart, what for system is at the other end?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!