Caller ID issue on T1-QSIG between Avaya and NEC pbx

[Daudet]

Hi
I have a Avaya CM5.x PBX with a PRI setup as T1-QSIG ( Peer-Master)toward a NEC PBX

Tracing the TAC for this trk Grp I receive callerID 2207 (NEC ext) on incomming call to my EXt 7200.
When I use extension 7200 (Avaya Pbx) and dial to 2207 I have only the Name that goes out to NEX PBX but no ext #

I could not find any config notes for T1-QSIG between Avaya and NEC Pbx.
Anyone has done it in the past.

THank.

My DS1 is setup a PBX Peer master,
Sig group has protocol B
Trunk Group also have Protocol b and all flag related to send Name and/or Number are Yes.
but i can not get any extension to send there own ext # on any call to NEAX

Thanks

Daniel Audet
Avaya Application Specialist
MTS Allstream
Montreal, Quebec, Canada

 

[texeric]

Not sure what your NEC/NEAX is expecting but try to use private/public numbering (whatever your trunk is set to) to send the trunk the digits.

http://www.theviagroup.com

 

[Daudet]

Thanks this solved my problem.



Daniel Audet
Avaya Application Specialist
MTS Allstream
Montreal, Quebec, Canada