caller id in analog station (2500)

[eyal1975]

Hi,
i have s8300 server+g700 rel 1.3.
the switch connect to the pstn network with pri (ds1 card)
i want to see the caller id information in the analog station,like i see in the ip-station.
the type of the analog station is 2500, and the telephone is support for caller id.

if someone know if it possible, please let mw know what should i need to configure.

regards

eyal

 

[telcoguy]

Not sure if S8300 is the same, but in Definity the type is "CallrID" in stead of "2500".


Hope this helps



Rob

 

[kristiandg]

I had been told conflicting information... I've been told the card int eh 8300 is just like a 793B (which does do caller id), then I've also been told it doesn't do the caller id.

Sorry.

Kris

 

[eyal1975]

so, i can see caller id information in analog station (s8300)?

its because this station connected to the intuity audix lx, and when i get external call, i dont see the calling party.

thanks

eyal

 

[johnwtek]

Eyal,

Did you try Rob's suggestion? (Change one of your stations from "2500" to "CallrID".)

Did it work?

John

 

[kristiandg]

That should be provided in the Modecode or Link interface, not from Caller ID.

Kris