Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Caller I.D. Block

Status
Not open for further replies.
tkoon

tkoon

IS-IT--Management
Joined
Mar 6, 2003
Messages
112
I have a customer with a Legend R-6.1, Hybrid/PBX mode that we can't get caller I.D. to block when dialing out using *67 code from SBC Ameritech. Any ideas?
 
Sort by date Sort by votes
You don't say what kind of trunks. I believe you have to remove * from the default 'deny' table. If they are using PRI trunking, you cannot block callerID on a per-call basis.
 
Upvote 0 Downvote
are you using trunk selection or ARS?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

rcc1000
  • Locked
  • Question Question
No Caller ID
Replies
3
Views
627
Dexman
Dexman
CPM86
  • Locked
  • Question Question
Partner ACS DSL 1600 card an caller id. Is it no like the T1 module?
Replies
1
Views
591
Westi
Westi
jsaad
  • Locked
  • Question Question
r7 caller id on display
Replies
10
Views
686
jsaad
jsaad
skyles
  • Locked
  • Question Question
Partner ACS to 66 block wiring
Replies
6
Views
614
Dexman
Dexman
Jim E
  • Locked
  • Question Question
Merlin Legend - Blocking Area Codes
Replies
5
Views
583
merlinman
merlinman

Part and Inventory Search

Sponsor

Back
Top