rkartevold
Vendor
Can anyone help with the codes required to see what is actually loaded on a CP 150 like the number of mail boxes, call center software, number of agents, etc. etc.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Pilot 150 Codes for installed features - Call Center, # of mail boxes etc. 1
- Thread starter rkartevold
- Start date
- Status
-
1
- #2
phoneguy427
Technical User
Log in with feature 983, press 44, press view
- Thread starter
- #3
rkartevold
Vendor
I've got a Call Pilot 100 that has a new power supply and the phone system had all of the codes removed via Xftest. When plugged into the system 1 and 2 go green (no flickering or dim) for exactly 22 seconds every time then they go out and no activity after two hours. Jiggling to cord makes all five come on then go off
allworxguy
Vendor
Jiggling to cord makes all five come on then go off
Which cord?
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Which cord?
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
- Thread starter
- #5
rkartevold
Vendor
Sorry. The power cord. Seems like there's a short in the plug.
Seems like repair houses want more than the unit is worth if that's the case. Does anyone know if a good call pilot repair company that doesn't charge an arm and a leg to repair this issue?
Seems like repair houses want more than the unit is worth if that's the case. Does anyone know if a good call pilot repair company that doesn't charge an arm and a leg to repair this issue?
- Status
Similar threads
- Locked
- Question