Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

call pick up 1

Status
Not open for further replies.

oned

MIS
Feb 8, 2005
70
US
OK guys see if I can explain this right. I work for a processing plant that works 24 hours. There is a pots line that the plant gives out for employees families to call at night. The calls go to a loud bell. I have set up phones to do a * 3 to pick up the ringing line. Most of these phones are NCOS 1 or NCOS 2.(internal calls only) My question is Will the NCOS 1 and 2 phones be able to pick up the ringing line with * 3?
 
As long as all sets are in the same pick up group and PUA is in CLS It will work. NCOS is mainly for outbound calling.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top