Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

call name display

Status
Not open for further replies.
shoughendo

shoughendo

Technical User
Joined
Oct 5, 2006
Messages
31
Location
CA
on a sl1 option 81, the customer want's to ad the call name display from the C.O. Is there something to program in the customer data block or aneywhere else in the systeme
.

Thank you
 
Sort by date Sort by votes
You must have an NI-2 PRI and in the RCAP of the d-channel, you would program NDS.

War Eagle!
Lions Baseball '09!
 
Upvote 0 Downvote
thank's telebub, but our protocol is nd2 ont the rcap
 
Upvote 0 Downvote
That doesn't matter. If the CO is sending you name delivery and your PRI interface is NI2, then just disable the d-channel at an appropriate time and add NDS.

War Eagle!
Lions Baseball '09!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Robones
  • Locked
  • Question Question
Call server ip address suddenly changed
Replies
2
Views
490
Robones
Robones
finest
  • Locked
  • Question Question
Nortel Ringer/Buzzer while you are on a call
Replies
4
Views
811
finest
finest
phonetech2012
  • Locked
  • Question Question
xeta call acounting
Replies
0
Views
394
phonetech2012
phonetech2012
BCU
  • Locked
  • Question Question
Caller id is not getting displayed
Replies
3
Views
837
gbtac3
gbtac3
LittleMaster
  • Locked
  • Question Question
Call connects but no voice cs1000 with NGN MSAG
Replies
3
Views
653
Firebird Scrambler
Firebird Scrambler

Part and Inventory Search

Sponsor

Back
Top