I rebuilt an SBS server yesterday so that the OS is running on a hardware SataII mirror.
i was unable to use Ghost so i backed up then reinstalled and restored from backup.
This was all done in a rush last night and my problem is this morning the second partition on the new array is showing as (system) so i cant change the drive letters (to migrate the data to the new array)
Looking into my boot.ini file below, i am confused as to how this box is able to boot at all, perhaps someone can shed some light on this, i have attached a screenshot of disk manager so you can see the layout but none of this appears to correspond with the partition referenced in Boot.ini
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Windows Server 2003 for Small Business Server" /noexecute=optout /fastdetect
i was unable to use Ghost so i backed up then reinstalled and restored from backup.
This was all done in a rush last night and my problem is this morning the second partition on the new array is showing as (system) so i cant change the drive letters (to migrate the data to the new array)
Looking into my boot.ini file below, i am confused as to how this box is able to boot at all, perhaps someone can shed some light on this, i have attached a screenshot of disk manager so you can see the layout but none of this appears to correspond with the partition referenced in Boot.ini
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Windows Server 2003 for Small Business Server" /noexecute=optout /fastdetect
