Button to play a lullaby over paging system

[mikeydidit]

Good morning all. I have another one of those that I Have been asked to set up. Hopefully someone here has had to do this and can point me in the right direction on it.

The hospital that I work for would like a button programmed that would access the overhead paging system. When this gets pressed it starts playing a lullaby for a few seconds and shuts off. This would be done when a new baby is born.

Anyone here had to setup anything like this?

Thanks
Mikeydidit


When is the last time you helped someone, just because you were able to?

For the best response to a question, read faq690-6594

 

[RedTech443]

At my hospital we have the avaya g450 trunked over a loop-start wats trunk to a valcom paging system, in this paging system we use a few tones, but brhams lullaby is one of them for when baby's are born. I can locate the Mp3 for you if you need it. But the system we use is

a valcom
ve8014r
ve6021
ve8004r
ve8048r

Valcom has a webpage and there staff is super nice and helpful. Hope this helps.

 

[RedTech443]

Also when a baby is born, our MFM dept calls our operator, and the simply press a button on their one-x console that triggers the audio over the paging system.