Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
busyout all trunk at one time
- Thread starter Amjed
- Start date
AvayaTier3
Technical User
You could only do this if all your trunks are on one circuit-pack or in one trunk-group.
Below are individual commands.
Command: busy help
Command: campon-busyout help
Command: busy board CCccss (where CC = cabinet, cc = carrier, ss = slot)
Command: busy trunk-group x (where x = trunk-group number)
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
Below are individual commands.
Command: busy help
Command: campon-busyout help
Command: busy board CCccss (where CC = cabinet, cc = carrier, ss = slot)
Command: busy trunk-group x (where x = trunk-group number)
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
- Status