Building a BDC to use a holdover while upgrading domain from NT4 to 2003. Issue is I have a machine that had no NIC, formatted disk, added nic, then started OS install(NT4 Server) but cannot see NIC therefore cannot join to domain or complete NT4 Server setup. I need to know how to add the nic on a machine with no OS installed. Any help appreciated. thx.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Building BDC-quick question
- Thread starter 88bw
- Start date
- Status
Similar threads
- Locked
- Question