Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Building a "meet me" vector? 1

Status
Not open for further replies.

Papagigo

Technical User
Sep 8, 2003
106
US
Could anyone give me the steps to build a simple Vector for a 6 extension "meet me"? We have 1000 did range using 3 flet-paths on our G3si V11. The customer wants to have employees that are at school, or on the road be able to call in to the bridge at a set time. We have no Operator or 800 sevice, so each person would be calling in direct.


Thanks in advance,

Mike Higgins
 
There are two good enteries in the FAQ section for Meet-Me conferencing: faq690-3264 and faq690-3242.

Susan
You have all the characteristics of a popular politician: a horrible voice, bad breeding, and a vulgar manner.
Aristophanes, 424 B.C.

Lex clavatoris designati rescindenda est.

 
Susan,

That's exactly what I needed, Thanks!

Mike Higgins
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top