Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BUG4030

Status
Not open for further replies.
macca12

macca12

Programmer
Joined
Apr 18, 2008
Messages
26
I've just installed a rel 5.5 system. I'm seeing a lot of BUG4030 errors. Does anyone know what these are and how to clear them ?

Thanks
 
Sort by date Sort by votes
"An Analog Line Card (NT8D03) supported PBX set (500/2500 type) went off-hook but the mainpm in the associated Call Register was improper. The mainpm was not RINGING, ESTABLISHED, CAMPON, CWAITING, SPECIAL, RAN_WAITING, nor was it CDR. Software will idle the call."
Click to expand...


are these codes followed by a tn, usually in packed hex format, but they should point to a port or card... looks like maybe battery on a port. possibly cross


john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
It relates to two ports on an anolgue card. Do you mean there could be a cross on the amphenol pairs to the frame ?
 
Upvote 0 Downvote
yes, but that would be rare.. a bad card is more likely.. or a cross past the frame..

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
I'll check the card. Thanks for your help.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

derbydave
  • Locked
  • Question Question
BUG4030 errors
Replies
1
Views
128
PERRYPJ
PERRYPJ

Part and Inventory Search

Sponsor

Back
Top