Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BTRIEVE 6.15 and TCP/IP

Status
Not open for further replies.
Tom128

Tom128

IS-IT--Management
Jul 24, 2002
9
US
I'd like to remove IPX/SPX from the netware servers but the btrieve calls fail when running just TCP/IP on the clients. It would be costly to upgrade the front-ends so that they could use pervasive. Any ideas? I haven't made any changes to the servers yet.
 
Sort by date Sort by votes
Tom,

Sounds like you have an IPX-dependent application. Until you change that situation you will not be able to move to a pure IP environment.

Mike.
 
Upvote 0 Downvote
Thanks for the reply. I loaded Pervasive 2000i on the workstation and stopped using brequest and that fixed it. All I've got to do to move to tcp/ip now is get the dos nwclient working.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

joemamps
  • Locked
  • Question
Netware 5 slow btrieve transaction after nw50sp6a update.
Replies
1
Views
353
Provogeek
Provogeek
Ymax18
  • Locked
  • Question
Does Citrix XenDesktop require a static IP?
Replies
0
Views
196
Ymax18
Ymax18
spi200
  • Locked
  • Question
CSG and RSA secuid question
Replies
0
Views
199
spi200
spi200
GeoffWilkins1962
  • Locked
  • Question
Desktop 5.6 and HP Protect
Replies
0
Views
200
GeoffWilkins1962
GeoffWilkins1962
arell12
  • Locked
  • Question
Secure Gateway and MS Threat Management Gateway
Replies
0
Views
225
arell12
arell12

Part and Inventory Search

Sponsor

Back
Top