Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BP 128/250: no busy tone at "busy" at extension, second call get free line signal

Status
Not open for further replies.

nitram11

Technical User
Joined
Nov 21, 2005
Messages
55
Location
DE
Hello, all,

have a problem with programming in a bp 128; have unchecked system cmd 2080 in bms ( free on 2 line) , but get a free line tone, not a busy tone, when a second call comes to "busy" extensions; is there something more
to do in the trunks ?;
thanks a lot for all hints.
 
Check if you have Open/Close 2nd line key programmed on the phone - if not, try to program and acivate/deactivate...make any difference?
 
Hello, zoo1
first thank you for your reply; have checked , if a key was programmed(was not) and also have programming a phonekey "free/busy on second line" ; activate/deaktivate makes no difference for incommming second calls; getting free line tone..
what is working correct. is, that led for second line does not go on, when second call comes in;

i have compared with annother programming , which i made long time ago in a bp 250, i only remember and find cmd 2080 for setting this ....?

i am wondering , if this may be influenced by new kind of trunks here (voip trunk instead of isdn)

any idear more ?
thanks a lot.
 
Same as you...only 2080 control this...have you tried internally?
 
-check camp on allowd at the extension
-if you call the reroute position via -0 you never get a busy tone
 

...camp on isn´t allowed...have to made some more combinations intern-extern , might be, that it has to do with no operator extension in this system..?

thank you both very much for this help, xs 650 + zoo1 !
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top