BOVPN Setup

[woodlee]

we are trying to setup some remote sites to connect to our network and use VOIP through the tunnels.

so far i have setup the 3 remote sites which can all connect to our offise network and calls from each site into our office work fine.

my problem is that i need remote site 1 to call remote site 2 and 3 and vice versa currently i can make the call and the phone will ring but i get no voice transmission through the setup and i cannot ping any of the networks apart from the main site's network. which would seem to point to a routing issue which is my problem i'm not to sure how i put the routing for the remote subnets into the watchguard.

any help would be greatfully recieved

thanks

 

[coladmin]

if you make a VPN connection between the remote sites I believe that this will work. are you using the VPN manager?