Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bootstraps and storagenode

Status
Not open for further replies.

sdohn

Technical User
Jan 20, 2005
22
DE
Hi, is it possible to save the bootstraps for a given group to the storagenode and not on the backup server.


 
Clearly no. You may share the hardware (devices, jukeboxes) but the bootstrap must be saved to a device which is locally defined at the server.

This makes sense as in case of a DR, this is what you must rebuild.
 
Technically this is possible, but if you have tape devices connected to the NetWorker Server, why would you want to do it?

You would need to define a file type device on the NetWorker Server and setup staging to move this data to a Storage Node with tape drive attached. This tape obviously then becomes your media in case of DR. The only reason I did this is the backup server was old and had no tape device attached.
 
I have a Server with 4Tapes directly attached, and a storagenode with 2 Tapes directly attached.

What I want is: Group DSAVE1 should put their savegroups to the Server, and Group TSAFE2 should put their savegroups to the storagenode.

Is this possible ?
 
Sure, as long as the NW server's client belongs to group DSAVE1.
 
And now my problem is, that the bootstrap is generated on 2 different Tapes.

NSRSERVER: Group: DSAVE1
Bootstraps goes to Tape Pool DSAVE1

STORAGENODE: GROUP: TSAFE2
Bootstraps goes to Tape Pool TSAFE2, but I must always have
one TSAFE2 Pool Tape for the bootstraps in the NSRSERVER.

Is it posible to write all bootstraps to Tape Pool DSAVE1
How ?
 
The provided information is not enough to help you exactly. However, i assume the server's client does also belong to group TSAFE2. If this is true, this is where the trouble comes from. Simply remove from here - he is already backed up by the
other group DSAFE1.

You might have another problem: If both groups are disabled, then NW will create a bootstrap no matter which group will run. This is a precaution - as NW will not know when he has the next chance to create a bootstratp, he will do it every time. And no - you can not change this.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top