JOY777
IS-IT--Management
- Oct 30, 2006
- 4
Does anybody know if I can block calls from a specific number? If so, how?
Thanks,
Thanks,
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Blocking Incoming Call
- Thread starter JOY777
- Start date
- Status
Is you have one of the newer ACD Intellicenters you can route calls based on Ani. The call would have to be presented to an ACD Pilot that then had the ANI table configured, you could then route based on that ANI to busy tone, disconnect, etc.....
IPOthermia
Vendor
There was also a software module required in display soft. It was possible to have the new intellicenter, but if your dealer didn't sell you the extra cost software ANI routing still didn't work. If you need the module name I can track it down for you.
- Status
Similar threads