Port Protocol Function
è 25* SMTP TCP Email system alarms from the IP Office to SMTP server. For IP Office 4.2 also used for Voicemail Email on Embedded Voicemail.
è 37 Time UDP Time requests from the IP Office to a Time Server (RFC868)
ç 53 DNS UDP Domain Name Service responses
ç 67 BOOTP/DHCP UDP DHCP Server Operation
è 68 BOOTP/DHCP UDP DHCP Client Operation
ç 69 TFTP UDP File requests to the IP Office.
è 69 TFTP UDP File requests by the IP Office.
ç 80 HTTP TCP HTTP File requests.
ç 161* SNMP UDP From SNMP applications.
è 162* SNMP Trap UDP To addresses set in the IP Office configuration.
è 389* LDAP TCP Lightweight Directory Access Protocol.
ç 500 IKE UDP Key exchange for IPSec protocol.
è 520 RIP UDP "To and from the IP Office to other RIP devices. For RIP1 and RIP2 (RIP1 compatible) the destination address is a subnet
broadcast, eg. 192.168.42.255. For RIP2 Multicast the destination address is 224.0.0.9."
ç 520 RIP UDP
ç 1701 L2TP UDP Layer 2 Tunneling protocol
ç 1718 H.323 UDP H.323 Discovery
ç 1719 H.323 RAS UDP H.323 Status. VoIP device registering with the IP Office.
è 1720 H.323/H.245 UDP H.323 Signalling. Data to a registered VoIP device.
è 2127 (UDP) UDP PC Wallboard to CCC Wallboard Server.
è 3478 SIP UDP Port used for STUN requests from the IP Office to the SIP provider
ç 5005 RTCPMon UDP RTCP Monitoring information from Avaya H323 phones.
çè 5060 SIP UDP/TCP* SIP Line Signalling
è 8080 HTTP TCP Browser access to the Delta Server application.
è 8089 Enconf UDP From the IP Office to the Conferencing Center Server Service. User access to the conference center is direct via HTTP sessions.
è 8888 HTTP TCP Browser access to the IP Office ContactStore (VRL) application.
"çè
49152 to 53247*" RTP/RTCP UDP Dynamically allocated ports used during VoIP calls for RTP and RTCP traffic. The port range can be adjusted through the System | Gatekeeper tab.
è 50791 IPO Voicemail UDP To voicemail server address.
ç 50793 IPO Solo Voicemail UDP From IP Office TAPI PC with Wave drive user support.
ç 50794 IPO Monitor UDP From the IP Office Monitor application.
ç 50795 IPO Voice Networking UDP Small Community Network signalling (AVRIP) and BLF updates. Each system does a broadcast every 30 seconds. BLF updates are sent required up a maximum of every 5 seconds.
ç 50796 IPO PCPartner UDP From an IP Office application (for example Phone Manager or SoftConsole). Used to initiate a session between the IP Office and the application.
ç 50797 IPO TAPI UDP From an IP Office TAPI user PC.
è 50798 (UDP) UDP IP Office Manager and Upgrade Wizard
è 50799 IPO BLF UDP Broadcast to the IP Office LAN and the first 10 IP addresses registered from other subnets.
è 50800 IPO License Dongle UDP To the License Server IP Address set in the IP Office config.
ç 50801 Econf UDP Conference Center Service to IP Office.
ç 50802 Discovery TCP IP Office discovery from Manager.
ç 50804* "Service Access
Protocol" TCP IP Office configuration settings access.
ç 50805* TCP TLS Secure"
ç 50808* TCP IP Office system status access.
ç 50812* TCP IP Office security settings access.
ç 50813* TCP TLS Secure"
• CDR/SMDR from the IP Office is sent to the port number and IP address defined during configuration and using either TCP or UDP as selected.
Application Specifc
IP Office Application Server
Port Component
"7070
22" "HTTP/HTTP Access
SFTP Access"
IP Office Manager
Port Component Location - %ProgramFiles%\Avaya\IP Office"TCP 50802
TCP 50804
TCP 50812
UDP 50798" IP Office Manager Manager\manager.exe
SoftConsole
Port Component Location - %ProgramFiles%\Avaya\IP Office"UDP 50796
UDP 50799" "SoftConsole
" SoftConsole\SoftConsole.exe
Phone Manager
Port Component Location - %ProgramFiles%\Avaya\IP Office"UDP 50796
UDP 50799" Phone Manager Phone Manager\PhoneManager.exe
"UDP 1719
UDP 1720" Phone Manager VOIP Server Phone Manager\iClaritySvr.exe
Contact Store
Port Component Location - %ProgramFiles%\Avaya\IP Office"TCP 8888
UDP 50791
UDP 50795" Contact Store Witness\tomcat5024\bin\tomcat5.exe
System Monitor
Port Component Location - %ProgramFiles%\Avaya\IP OfficeUDP 50794 System Monitor Monitor\sysmonitor.exe
TAPI2
Port Component Location - %ProgramFiles%\Avaya\IP OfficeUDP 50797 TAPI2 TAPI\tspi2w.tsp
Voicemail Pro Service
Port Description
TCP 25 Used to listen for SMTP connections.
UDP 37 Used to receive time requests (RFC 868).
TCP 143 Used to service IMAP4 requests.
UDP 50791 Used to receive requests from IP Office PBX.
TCP 50791 Used to receive requests fromone-X Portal for IP Office.
TCP 50791 Used to receive connections from Voicemail Pro client.
One X Portal
Port Description
4560 This port is used by log4j socket appender.
5222 This port is used for XMPP client/server communication.
5269 This port is used for server to server federation. This port federates with the External XMPP servers or XMPP enabled servers such as GTalk, Yahoo, and MSN.
5269 This port is used for XMPP server to server federation. If the customer is not intending to federate with external XMPP servers then this port does not need to be opened on the firewall.
8005 Used by the Tomcat shutdown listener.
8080 Default HTTP browser access port. This port number can be changed during installation.
8082 The database component of the one-X Portal for IP Office uses this port.
8086 This port is used for HTTPS access to MyBuddy.
8443 Used for HTTPS access to one-X Portal for IP Office (Only for Windows installation of the one-X Portal for IP Office).
8444 This port is used for initial communication between the mobility client (Android/iPhone) and the one-X Portal for IP Office. If customer is NOT using the mobility client or is only using it on the internal WiFi network, then this port does not need to be opened on the firewall.
8666 This port is used by the JVMX component of the one-X Portal for IP Office. This port number can be changed during installation.
9094 This port is used for OpenFire XML RPC (Remote Procedure Call) and administration console.
9095 This port is used by the OpenFire admin console (https).
8080-to- 8090 "To allow the one-X Call Assistant to communicate through a specific TCP port
"