BladeCenter ESM (nortel) Trunking

[chieftan999]

Can anyone tell me how you can tell if trunking is enabled on a Nortel ESM in a BladeCenter.

I have looked at the Cisco switch on the other end of the ESM and that shows as trunked but there must be a way to tell within the GUI for the ESM.
The problem is that Nortel have a different view from Cisco and that when the External ports are marked blue, this does not mean trunked but LACP aggregated links.

 

[chieftan999]

I have found this out. Thanks anyway. Please have a look at the next technical question. Very good one.

 

[catorze]

Take a look at the firmware update for the Nortel ESM from IBM's site.