Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bind on Sles 9

Status
Not open for further replies.

womp

Technical User
Apr 6, 2001
105
US
Hello,
I am having problems with updating the slave dns server
the serial on the master server is 2006011000
the serial on the slave server(same zone) is 2005121400
I have set the refresh on the slave server to 5 minutes
The options on the slave server is:
Options {
forwarders { 10.12.1.5; 10.12.1.6; };
allow-transfer { 172.33.23.6: }; <-- this is the master server ip
allow-notify { 172.33.23.6; }; <-- once again this is the master server ip
notify yes;
};

Am I missing something??
 
these options used for the master zone.

for a slave you need something like

zone "zone.net" {
type slave;
file "zone.db";
masters {
x.x.x.x; <- IP address of master
};
};
 
I receive :
unexpected rcode (SERVFAIL) from master

where can I look this up to find what's wrong?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top