Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BE 9.0 for NetWare on 4.11 server ?

Status
Not open for further replies.
cschreier

cschreier

IS-IT--Management
Joined
Jan 16, 2003
Messages
1
Location
DE
Hi all,

the official minimum requirements for BE 9.0 for Netware is NetWare 4.2 (according to their website).

Since 4.2 basically is a patched 4.11, the question is: would BE 9.0 NW run on a Netware 4.11 SP9 server ?

Thanks in advance,

Chris
 
Sort by date Sort by votes
Hi

It may run on the server but as you stated the offical status is that it is not supported. This doesnt mean it wont work. Give it a go.

Regards,
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

anil5555
  • Locked
  • Question Question
Networker in HA ( High availability ) for DR
Replies
0
Views
782
anil5555
anil5555
Martha_SysAdm
  • Locked
  • Question Question
Which hardware and software can i consider for Backup and Disaster recovery
Replies
3
Views
1K
goombawaho
goombawaho
P_Nab
  • Locked
  • Question Question
Networker loosing manually set read only status of tapes
Replies
0
Views
787
P_Nab
P_Nab
BungleBear
  • Locked
  • Question Question
Arcserve - Sharepoint Online
Replies
0
Views
694
BungleBear
BungleBear
Robert Lee
  • Locked
  • Question Question
Rubber roller of Onstream drives have turned to goo in 2020.
Replies
7
Views
1K
edfair
edfair

Part and Inventory Search

Sponsor

Back
Top