Backup Contacts Avaya 9611

[squirre007]

I'm trying to backup the contacts on our Avaya 9611's for the first time. When I edit a contact, I get a "Backup Failed" message on the phone.

I'm using MV_IPTel running on a Windows 2008 server. MV_IPtel is working fine for providing firmware to the phones.

Here is what is setup in the 46xxsettings.txt file:

SET BRURI

http://roetfp003a/PhoneBackup

SET BRAUTH 0

Here is a copy of the MV_IPTel.ini file:

[Settings]
#======================================================================
# Set detailed log for addtional debugging info
DetailedLog=1
# Sets the location of the MV_IPTel log file
LogFile=C:\Program Files (x86)\Avaya\MV_IPTel\log\MV_IPTel.log
RunStatus=1
StatusPort=6090
StatusRefresh=10
SecureStatus=1
SecurePort=6098
Archive=1
MaxClients=0
ClientSession=0
UsingHeartBeat=0
#=====================================================================
KeyFilePW=gSy5fBkwHxL6mpdtpBQJ2x==
Mode=1
IPAddress=127.0.0.1
ServerName=MyHost
ChainFile=
RootFile=
CertFile=C:\Program Files (x86)\Avaya\MV_IPTel\certs\IPTel.pfx
KeyFile=C:\Program Files (x86)\Avaya\MV_IPTel\certs\IPTelkey.pem

[FTP]
#=====================================================================
# set the FTP server active
RunFTP=1
# defines the FTP control port
FTPPort=21
# defines the FTP data port
FTPDataPort=20
# Sets the location of the FTP data directory to catch terminal backups
FTPDir=C:\Program Files (x86)\Avaya\MV_IPTel\data\FTPdata
# FTP Timeout (secs)
FTP_TimeOut=5
# Enable SuperUser
EnableSU=1
# set the FTP SuperUser Name (encrypted)
SUUserName=mvuser
# set the FTP SuperUser Password
SUPassword=TSc2VJYDXQiK4oryl8jfgs==
#
#=====================================================================
FTP_ TimeOut=5
IPTelMode=1

[FTPS]
#=====================================================================
# set the FTPS server active
RunFTPS=0
# defines the FTP control port
FTPPort=990
# defines the FTP data port
FTPDataPort=889
#=====================================================================
FTPSPort=990
FTPSDataPort=889

[TFTP]
#=====================================================================
# set the Trivial FTP server active
RunTrivialFTP=1
# defines the Trivial FTP port
TrivialFTPPort=69
# Enable TFTP PUTs (default disabled)
TFTPPut=0
# Sets the location of the TFTP data directory for terminal downloads
TFTPDir=C:\Program Files (x86)\Avaya\MV_IPTel\data\TFTPdata
ReqUpgrade=c:\Program Files\Avaya\MV_IPTel\data\TFTPdata\46xxupgrade.scr
DelUpgrade=c:\Program Files\Avaya\MV_IPTel\data\TFTPdata\fxd_upgrade.scr
ReqSettings=c:\Program Files\Avaya\MV_IPTel\data\TFTPdata\46xxsettings.txt
DelSettings=c:\Program Files\Avaya\MV_IPTel\data\TFTPdata\fxd_settings.txt
#=====================================================================

[HTTP]
#=====================================================================
# set the HTTP download server active
RunHTTP=1
# defines the HTTP download port
HTTPPort=80
# Sets the location of the HTTP data directory for downloads
HTTPDir=C:\Program Files (x86)\Avaya\MV_IPTel\data\HTTPdata
#======================================================================

[HTTPS]
#======================================================================
# set the HTTPS download server active
RunHTTPS=0
# defines the HTTPS download port
HTTPSPort=411
# Sets the location of the HTTPS data directory for downloads
HTTPSDir=C:\Program Files (x86)\Avaya\MV_IPTel\data\HTTPSdata
# Sets the location of the CertFile (read as PKCS#12 for .pfx or PEM all others)
CertFile=C:\Program Files (x86)\Avaya\MV_IPTel\certs\IPTel.pfx
# Sets the location of the optional PEM KeyFile
KeyFile=C:\Program Files (x86)\Avaya\MV_IPTel\certs\IPTelkey.pem
# KeyFilePW is encrypted and used as for the pfx file or pem key file
KeyFilePW=gSy5fBkwHxL6mpdtpBQJ2x==
# narrow config for Avaya IPTel (TLSV1 using RSA_NULL_SHA)
IPTel=1
# sets the SSL variants beyond Avaya IPTel mode
SSLV2=0
SSLV3=0
TLSV1=1
# Use Client Authorisation
ClientAuth=0
UseProxy=0
ProxyAddr=proxy.be.avaya.com
ProxyPort=9000
#=====================================================================

[BACKUP_SERVERS]
#=====================================================================
# FileServer for Backup & Update- uses HTTPS
FileServer=1
# Firmware update from primary / Secondary File servers
RequestUpdates=0
# FTP files uploaded to primary / Secondary File servers
RequestBackup=0
# Enable use of the Primary file server
UsePrimarySvr=0
# Primary file server IP address ( or resolvable DNS)
PrimaryIP=192.168.0.10
# Enable use of the Secondary file server
UseSecondarySvr=0
# Secondary file server IP address ( or resolvable DNS)
SecondaryIP=192.168.0.11
UpdateInterval=2
CustomFTP=0
CustomFTPDir=YourRemoteSvrDir
CustomFTPUName=
CustomFTPPwd=YourUserNameYUQATGFEAG==
# Enable CDR Backup - enable=1 on both File Server & Client
CDRBackup=0
# Enable BCMS Backup - enable=1 on both File Server & Client
BCMSBackup=0
# Retain CDR / BCMS copy data for x days ( Receiver always + 1 week)
RetainDays=7.0
#====================================================================

[SNMP]
#====================================================================
#
# Validate FTP store with SNMP check
UseSNMP=0
# In case the SNMPGET syntax changes you can redefine the commands
# Uncomment the relevant line to override the internal command
# the syntax is "SNMPGET + IPADDR + SNMPOBJ + SNMPAWK
# the IPADRR is derived from the connection
# Note there are relevant spaces & quotes within the commands
# which are subtrely different from a pure command line version.
# Omitting any of these will cause the program version to fail
#Command=/usr/bin/snmpget
#Params=-v2c -cpublic
#ExtObject=.1.3.6.1.4.1.6889.2.69.1.4.9.0
#TypeObject=.1.3.6.1.4.1.6889.2.69.1.1.2.0
#CheckObject=.1.3.6.1.2.1.1.2.0
#Awk=| awk -F \" '' {print $2 } ''
#AwkCheck=| awk -F :: '' {print $3 } ''
#====================================================================

#SNMPTYPE=.1.3.6.1.4.1.6889.2.69.1.1.2.0
#SNMPEXT=.1.3.6.1.4.1.6889.2.69.1.4.9.0
#SNMPPARAMS=-v2c -mall -cpublic
#SNMPCMD=mvsnmpget.exe

Any help would be appreciated...thanks!

 

[JayNEC]

So, first of all, that BRURI. I would put the IP address in there instead of a hostname. You have no way to know if the phone is correctly resolving that hostname - it's not even an FQDN anyway.

New England Communications

http://www.necomm.com