B179 on IPO Anywhere Server R11

[dsm600rr]

Hello All,

Having an Issue getting my B179 Conference phone to Register to my IPO Anywhere Server

IPO: 192.168.42.230

Conference Extension:

Conference Web GUI Settings:

Log:

Nov 1 22:34:10: INF: Registration sent
Nov 1 22:34:43: WAR: SIP registration failed, status=408 (Request Timeout)
Nov 1 22:35:13: INF: Registration sent
Nov 1 22:35:46: WAR: SIP registration failed, status=408 (Request Timeout)
Nov 1 22:36:16: INF: Registration sent
Nov 1 22:36:42: Requesting restart
Nov 1 22:36:42: INF: ctl: Exit request
Nov 1 22:36:42: INF: mmi: Exit request
Nov 1 22:36:43: INF: sip_manager: Shutting down the SIP stack
Nov 1 22:36:43: ERR: Unable to create/send REGISTER: Object is busy (PJSIP_EBUSY) [status=171001]
Nov 1 22:36:44: WAR: SIP registration failed, status=503 (Service Unavailable)
Nov 1 22:36:44: INF: main: exit 1
Nov 1 22:36:44: Need Restart
Nov 1 22:36:49: INF: sip_manager: ua_cfg.nameserver_count = 1
Nov 1 22:36:49: INF: sip_manager: ua_cfg.nameserver[0] = 192.168.42.230
Nov 1 22:36:49: INF: sip_manager: ua_cfg.outbound_proxy_cnt = 0
Nov 1 22:36:49: INF: pjsua version 1.0-trunk for arm-926-linux-gnu initialized
Nov 1 22:36:49: INF: Registration sent
Nov 1 22:36:49: INF: sip_manager: Setting codec G722, prio 4
Nov 1 22:36:49: INF: sip_manager: Setting codec PCMA, prio 3
Nov 1 22:36:49: INF: sip_manager: Setting codec PCMU, prio 2
Nov 1 22:36:49: INF: sip_manager: Setting codec G729, prio 1
Nov 1 22:37:22: WAR: SIP registration failed, status=408 (Request Timeout)
Nov 1 22:37:52: INF: Registration sent
Nov 1 22:38:25: WAR: SIP registration failed, status=408 (Request Timeout)
Nov 1 22:38:55: INF: Registration sent

ACSS

 

[dsm600rr]

Getting this from Monitor:

4067901mS SIP Reg/Opt Rx: phone
REGISTER sip:192.168.42.230;transport=udp SIP/2.0
Via: SIP/2.0/UDP 192.168.42.52:5057;rport;branch=z9hG4bKPj9lRcgFp2JiwhKKME7xAxoICLAeJV9K9o;alias
Route: <sip:192.168.42.230;transport=udp;lr>
Max-Forwards: 70
From: <sip:150@192.168.42.230>;tag=ZfTkpYuSOfe19B8A3.0IWYHqWuSIz3eW
To: <sip:150@192.168.42.230>
Call-ID: MHI5i5ta3kKmtbK2wj5xDlrH387P0HWi
CSeq: 23650 REGISTER
User-Agent: Avaya B179 2.4.3.5
Contact: <sip:150@192.168.42.52:5057;ob>
Expires: 180
Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, OPTIONS
Content-Length: 0

4067901mS Sip: SIPDialog f7328370 created, dialogs 2 txn_keys 1 video 1 presentation 1 camera 1 unsupp audio 0
4067901mS Sip: SIP REG: Local client can only register with local ports(transport=2 port=5060)
4067901mS Sip: SIPDialog f7328370 deleted, dialogs 1 txn_keys 0


ACSS

 

[derfloh]

Transport 2 probably means TCP instead of UDP.

Check you IPO System Settings (LAN Interface) if SIP UDP port is enabled.

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[dsm600rr]

derfloh:

ACSS

 

[derfloh]

Seems that IPO doesn't like the B179 to connect to UDP 5057 but to TCP 5060.

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[dsm600rr]

Just a heads up I got it to finally register with the following:

ACSS

 

[dsm600rr]

Is it normal for my J179 and B179 SIP Devices to be using different Protocols?

ACSS

 

[derfloh]

Did you configure IPO for UDP 5060 now?

B179 and J-Series are completely different phones. So can be, yes?

IP Office remote service

https://www.fwilke.com/home

Fixed price SIP trunk configuration:

https://www.fwilke.com/en/ip-office-sip-trunk-en/

CLI based cale blocking:

https://blog.fwilke.com/ip-office-block-calls-from-specific-cli/

SCN fallback over PSTN:

https://blog.fwilke.com/ip-office-scn-fallback/

 

[dsm600rr]

derfloh: Yes, I updated UDP to 5060 as well as that's what it was looking for on the B179 GUI, not sure why it was at UDP 5057 on the IPO.

ACSS