Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya ip office release 6 (expansion unit problem) 1

Status
Not open for further replies.

ra1ma2

Programmer
Jul 31, 2013
28
TZ
hallow!
help me on the digital expansion unit the connection doesn't seem on the ip office and the majour problem it flashes green then then red, my self with fellow come p with the solution of re setting bat it still not working under normal conditions.

!
 
check all the connections to the unit
this can be caused by something as simple as a network connector on a pc incorrectly patched back to a phone port

otherwise call your maintainer as you may have a faulty unit.

A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
 
hallow !
ip guru thanks for your advise!
in case f connector all i have checked it okay or other wise as you said is a faulty unity.
because even before of connecting to the ip office but there is a problem on flashing it is abnormal it should be fleshes green , now instead of green it flashes greeen then red green then red that is a problem also! second problem it doesnt show it self o ip office when i tried to connect!
 
then the unit is continous rebooting due to a internal fault, replace the unit.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top