I used the following link to configure my avaya system for sip trunking. The status shows as idle and when you call you get a fast busy signal on incoming and when you try to call out it rejects all calls.
Any ideas?
Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya IP office 500 V2 8.1 Metaswitch sip trunking
- Thread starter mg86
- Start date
