Auto-Msg-Wait for a VDN mailbox

[Guest_imported]

I am trying to get a aut-msg-wt light to work for a VDN. Since the VDN and mailbox number are the same it doesn't seem to like it. Accroding to all of the docs I should be able to use a aut-msg-wt button on my 6408 for a VDN mailbox. I was hoping to avoid having to make an x port station just for this and end up changing the mailbox or VDN numbers. I am running a G3V9.2.

Thanks!

 

[politech]

Your message light won't light if you have any messages in the mailbox before you program the button.

I would recommend removing the button and cleaning out the mailbox and then reprogramming the button.

I hope this helps.

 

[Guest_imported]

That still didn't work. The mailbox was empty and just tried and no light.

 

[janney]

Zurichj, try using the following "messaging" line in your vector. (see step 32)where "split 10" is my Audix Hunt Group. Use YOUR own Audix Hunt Group number there; and "8333" is my VDN number. Use YOUR VDN number there.


23 wait-time 0 secs hearing ringback
24 goto step 32 if available-agents in split 52 < 1
25 queue-to split 52 pri m
26 stop
27
28
29
30
31
32 messaging split 10 for extension 8333

 

[Callmaster]

Hy zurichj
you can also write in the vector

messaging skill for extension active

so you can use the vec for more vdn´s.

Greetings
Callmaster