redhammer
Technical User
- Jan 12, 2007
- 6
On IPoffice with digital phones, how do you set what line or intercom key is selected when you go off-hook?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Auto line selection
- Thread starter redhammer
- Start date
- Status
amriddle01
Programmer
lol
redhammer, you are talkiing about key system working which is the "old" way of doing things. The IP Office isn't a key system and is not good at pretending to be one, you should just let the system pick form a pool of lines and just target the handset you want to ring with incoming call route, if you need to always dial out a certain line first then use ARS to do this or as a last resort shortcodes and prefixes or line appearence keys.
redhammer, you are talkiing about key system working which is the "old" way of doing things. The IP Office isn't a key system and is not good at pretending to be one, you should just let the system pick form a pool of lines and just target the handset you want to ring with incoming call route, if you need to always dial out a certain line first then use ARS to do this or as a last resort shortcodes and prefixes or line appearence keys.
- Status