We have installed an autodial phone in our Emergency Room vestibule and would like for it to autodial and ring to 2 separate phones. How would I set this up to allow 2 phones in different areas to ring when the handset is lifted. Are there limitations to making it ring to 2 separate digital lines or can it ring to 1 analog and 1 digital? Option11c
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Auto-Dialer Ringing 2 separate Lines
- Thread starter JoeBuck
- Start date
If the target phones are digital, just put a common DN on each phone and have the HOT ring to it.
If there is one digital and one analog target, just add the DN of the analog phone onto the digital phone and set the HOT to the DN of the DN of the analog phone (which you just added to the digital phone)
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
If there is one digital and one analog target, just add the DN of the analog phone onto the digital phone and set the HOT to the DN of the DN of the analog phone (which you just added to the digital phone)
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
- Thread starter
- #3
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question