Audix Record Feature Not Working 1

[cmcdan1523]

I placed an Audix-Rec button on my phone, but when I am on a call and press this button, it doesn't do anything. I typed in our audix hunt group extension when I changed the button. Are there any features which need turned on?
Cos? Cor? Hunt Group permissions?
G3R v11. 2420 telephone.
Thanks.

 

[g3rguy]

It takes a few seconds for it to activate. You should hear a tone and then it is recorded in you VM box.

 

[NX01]

Is it enabled in the system? Do a "cha sys feat" and go to page 6 or 7. Look for

AUDIX ONE-STEP RECORDING
Apply Ready Indication Tone To Which Parties In The Call?

Change it to what ever your state law requires.

In the future everything will work...

 

[chiefred]

I presume this is not available to G3si ver 10 since I cant find it on pages 4/5/6/7

 

[g3rguy]

It should be on your g3s1 at the bottom of page 6

 

[cmcdan1523]

I found my trouble. You cannot have console permissions - which average people will not.
I also have a release 8 PBX I would like to record on.
Same basic question as chiefred. In which release did this feature become available. I do not have the option in the older release. Is it something that can be turned on with the earlier releases?

 

[chiefred]

It appears once again that all the cool toys showed up in vers 11+ and since I cant squeeze a nickel out of my employer for even tie-wraps, there is no hope to upgrade and I will sit and watch the world go by

 

[ckawakam]

Hey chiefred, think V10 is hard luck, you're talking to a G3siV6! So you're not alone watching the clouds roll.

 

[chiefred]

Sorry Ckawakam, and I thought I had it bad.

 

[Dunstan]

It became an option under rel 1.3. So anything prior is sol. Sorry