Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Audix access via LAN 1
- Thread starter dadz
- Start date
-
1
- #2
You need to have an Intuity Audix to do this. From the main menu, select, TCP/IP Properties. In there will be your IP address. (If there isn't one there, Audix is not on the network.) To connect through ASA, you put in the IP address and the port is 23.
Also, be aware that some people put Audix on a direct connection to the Definity. If the IP address in Audix doesn't seem to match the rest of your network (especially the Switch and CMS IPs) it may be directly connected. You can also tell by tracing the ethernet connection.
If it is a direct connection, you can not put it on the network without doing some reprogramming in the switch. Otherwise, the connection between the 2 would go down.
Also, be aware that some people put Audix on a direct connection to the Definity. If the IP address in Audix doesn't seem to match the rest of your network (especially the Switch and CMS IPs) it may be directly connected. You can also tell by tracing the ethernet connection.
If it is a direct connection, you can not put it on the network without doing some reprogramming in the switch. Otherwise, the connection between the 2 would go down.
- Status
Similar threads
- Locked
- Question