Audiocodes MP-114 FXO issues on a nortel 1000m

[mrwhite28]

I have a Audiocodes MP-114 FXO analog gateway. When I dial into one of the numbers assigned to it,I get a second dial tone and then it disconnects shortly after. Is there something that needs to be done in the PBX as well as another configuration issue. I have tried to get assitance rom audiocodes and they pushed me off on the company I purchased it from. Does anyone have an INI file for this set up ?

 

[gwebster]

Have you checked Nortel's Compatability information (

http://www.nortel.com/prd/dpp/product/gateways.html)

and any associated Configuration/Testing notes?

 

[pronei]

Search the forums here, I've posted several board.ini's

 

[mrwhite28]

I have the new 5.4 software version on my audiocodes MP-114 fxo gateway. Im trying to connect it via SIP to the messaging server. I have 4 analog line going into it which are in a hunt group and a pilot number assigned. Still havent figured out how to configure the gateway to see the server. Here is my INI ...

**************
;** Ini File **
;**************

;Board: MP-114 FXO
;Serial Number: 1780339
;Slot Number: 1
;Software Version: 5.40A.033.005
;DSP Software Version: 204IM => 540.20
;Board IP Address: 10.25.93.50
;Board Subnet Mask: 255.255.240.0
;Board Default Gateway: 10.25.80.2
;Ram size: 32M Flash size: 8M
;Num DSPs: 1 Num DSP channels: 4
;Profile: NONE
;-----------------------------------------


[SYSTEM Params]

DNSPriServerIP = 10.20.81.12
DNSSecServerIP = 10.20.81.13
SyslogServerIP = 0.0.0.0
EnableSyslog = 0
VXMLFIleName = ''
NTPServerIP = 0.0.0.0
NTPServerUTCOffset = 0
NTPUpdateInterval = 86400
ENABLEPARAMETERSMONITORING = 1
ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard', 'naa', 'spc'

[BSP Params]

PCMLawSelect = 3
BaseUDPPort = 6000
EnableLANWatchdog = 0
SMDI = 0
EnableMultipleIPs = 0
VLANMODE = 0
VLANMEDIAVLANID = 3
StorageServerNetworkAddress = 255.255.255.255

[ATM Params]


[Analog Params]

FXSLoopCharacteristicsFilename = 'MP11x-02-1-FXS_16KHZ.dat'
ANALOGPORTINFO_0 = '3420'
ANALOGPORTINFO_1 = '3452'
ANALOGPORTINFO_2 = '3471'
ANALOGPORTINFO_3 = '5712'
ANALOGPORTINFO_4 = ''
ANALOGPORTINFO_5 = ''
ANALOGPORTINFO_6 = ''
ANALOGPORTINFO_7 = ''

[ControlProtocols Params]

AdminStateLockControl = -1

[MGCP Params]


[MEGACO Params]

DIGITMAPPING = ''
EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0

[PSTN Params]


[SS7 Params]


[Voice Engine Params]

VoicePromptsFileName = ''
L1L1ComplexRxUDPPort = 0
EnableEchoCanceller = 1
VoiceVolume = 1
BrokenConnectionEventTimeout = 100
DTMFTransportType = 3
MFTransportType = 3
CallerIDType = 0
FaxTransportMode = 2
V21ModemTransportType = 1
FaxRelayRedundancyDepth = 2
FaxRelayEnhancedRedundancyDepth = 2
CNGDetectorMode = 0
RTPDirectionControl = 0
RFC2833PayloadType = 101
RFC2833TxPayloadType = 96
RFC2833RxPayloadType = 96
RFC2198PayloadType = 104
EnableAnswerDetector = 1
NTEMaxDuration = -1
FarEndDisconnectSilenceMethod = 2
FarEndDisconnectSilencePeriod = 120

[WEB Params]


[SIP Params]

MAXDIGITS = 20
TIMEBETWEENDIGITS = 4
REMOVEPREFIX = 0
USERADLOG = 1
ISPROXYUSED = 0
ISREGISTERNEEDED = 0
AUTHENTICATIONMODE = 0
ADDTRUNKGROUPASPREFIX = 0
ISTWOSTAGEDIAL = 0
ROUTEMODEIP2TEL = 1
ROUTEMODETEL2IP = 1
RADDEBLEVEL = 2
CHANNELSELECTMODE = 2
RADLOGOUTPUT = 1
GWDEBUGLEVEL = 6
DEFAULTNUMBER = '6070'
SIPGATEWAYNAME = ''
STATICNATIP = 0.0.0.0
PROGRESSINDICATOR2IP = -1
ADDPORTASPREFIX = 0
ALTROUTINGTEL2IPENABLE = 1
ALTROUTINGTEL2IPCONNMETHOD = 0
XFERPREFIX = '8560'
CDRSYSLOGSERVERIP = 0.0.0.0
PSTNALERTTIMEOUT = 180
VoiceMailInterface = 1
SUBSCRIPTIONMODE = 0
SIPTRANSPORTTYPE = 2
GWREGISTRATIONNAME = ''
REMOTEBASEUDPPORT = 0
ADDPHONECONTEXTASPREFIX = 0
REGISTRARTRANSPORTTYPE = 1

[SCTP Params]


[VXML Params]


[IPsec Params]


[Audio Staging Params]

DisableSNMP = 1
SNMPTrapManagerHostName = ''

;
; *** TABLE DspTemplates ***
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts
;

;
; *** TABLE InterfaceTable ***
;
;

[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes, InterfaceTable_IPv6InterfaceMode, InterfaceTable_IPAddress, InterfaceTable_PrefixLength, InterfaceTable_Gateway, InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0 = 6, 0, 10.25.93.50, 20, 10.25.80.2, 1, ALL;

[ \InterfaceTable ]

;
; *** TABLE PREFIX ***
;
;

[ PREFIX ]
; ** NOTE: Changes were made to active configuration.
; ** The data below is different from current values.
FORMAT PREFIX_Index = PREFIX_DestinationPrefix, PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix, PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix, PREFIX_TransportType, PREFIX_SrcTrunkGroupID;
PREFIX 0 = *, 10.20.82.19, *, 0, 255, -1, , -1, , -1, -1;

[ \PREFIX ]

;
; *** TABLE CoderName ***
;
;

[ CoderName ]
; ** NOTE: Changes were made to active configuration.
; ** The data below is different from current values.
FORMAT CoderName_Index = CoderName_Type, CoderName_PacketInterval, CoderName_rate, CoderName_PayloadType, CoderName_Sce;
CoderName 0 = g711Ulaw64k, 20, 0, 255, 0;
CoderName 1 = g729, 20, 0, 255, 0;
CoderName 5 = g711Alaw64k, 20, 0, 255, 0;
CoderName 6 = g729, 20, 0, 255, 0;
CoderName 7 = g729, 20, 0, 255, 0;
CoderName 8 = g7231, 30, 0, 255, 0;

[ \CoderName ]

;
; *** TABLE TrunkGroup ***
;
;

[ TrunkGroup ]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId, TrunkGroup_LastTrunkId, TrunkGroup_Module;
TrunkGroup 0 = 0, 255, 1, 1, , 0, 255, 255;
TrunkGroup 1 = 0, 255, 2, 2, , 0, 255, 255;
TrunkGroup 2 = 0, 255, 3, 3, , 0, 255, 255;
TrunkGroup 3 = 0, 255, 4, 4, , 0, 255, 255;

[ \TrunkGroup ]

;
; *** TABLE NumberMapIp2Tel ***
;
;

[ NumberMapIp2Tel ]
FORMAT NumberMapIp2Tel_Index = NumberMapIp2Tel_DestinationPrefix, NumberMapIp2Tel_SourcePrefix, NumberMapIp2Tel_SourceAddress, NumberMapIp2Tel_NumberType, NumberMapIp2Tel_NumberPlan, NumberMapIp2Tel_RemoveFromLeft, NumberMapIp2Tel_RemoveFromRight, NumberMapIp2Tel_LeaveFromRight, NumberMapIp2Tel_Prefix2Add, NumberMapIp2Tel_Suffix2Add, NumberMapIp2Tel_IsPresentationRestricted;
NumberMapIp2Tel 0 = 6, *, *, 255, 255, 4, 0, 255, , , 255;

[ \NumberMapIp2Tel ]

;
; *** TABLE NumberMapTel2Ip ***
;
;

[ NumberMapTel2Ip ]
; ** NOTE: Changes were made to active configuration.
; ** The data below is different from current values.
FORMAT NumberMapTel2Ip_Index = NumberMapTel2Ip_DestinationPrefix, NumberMapTel2Ip_SourcePrefix, NumberMapTel2Ip_SourceAddress, NumberMapTel2Ip_NumberType, NumberMapTel2Ip_NumberPlan, NumberMapTel2Ip_RemoveFromLeft, NumberMapTel2Ip_RemoveFromRight, NumberMapTel2Ip_LeaveFromRight, NumberMapTel2Ip_Prefix2Add, NumberMapTel2Ip_Suffix2Add, NumberMapTel2Ip_IsPresentationRestricted;
NumberMapTel2Ip 1 = *, *, *, 255, 255, 0, 0, 0, , , 255;

[ \NumberMapTel2Ip ]

;
; *** TABLE PstnPrefix ***
;
;

[ PstnPrefix ]
FORMAT PstnPrefix_Index = PstnPrefix_DestPrefix, PstnPrefix_TrunkGroupId, PstnPrefix_SourcePrefix, PstnPrefix_SourceAddress, PstnPrefix_ProfileId, PstnPrefix_SrcIPGroupID, PstnPrefix_DestHostPrefix, PstnPrefix_SrcHostPrefix;
PstnPrefix 0 = *, 0, *, , 0, -1, , ;

[ \PstnPrefix ]

;
; *** TABLE TxDtmfOption ***
;
;

[ TxDtmfOption ]
FORMAT TxDtmfOption_Index = TxDtmfOption_Type;
TxDtmfOption 0 = 1;
TxDtmfOption 1 = 2;

[ \TxDtmfOption ]

;
; *** TABLE IpProfile ***
;
;

[ IpProfile ]
FORMAT IpProfile_Index = IpProfile_ProfileName, IpProfile_IpPreference, IpProfile_CodersGroupID, IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay, IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, IpProfile_SigIPDiffServ, IpProfile_SCE, IpProfile_RTPRedundancyDepth, IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode, IpProfile_VxxTransportType, IpProfile_NSEMode, IpProfile_IsDTMFUsed, IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia, IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller, IpProfile_CopyDest2RedirectNumber, IpProfile_MediaSecurityBehaviour, IpProfile_CallLimit, IpProfile_EnableHold;
IpProfile 1 = , 1, 0, 1, 10, 10, 46, 40, 0, 0, 0, 0, 2, 0, 0, 0, 0, -1, 1, 0, 0, -1, 1;

[ \IpProfile ]

 

[morenot]

I Have a MP 114 FXO connected to SCS 500

I set up on MP 114 FXO, Protocol configuration/Endpoint settings/Automatic dialing: Port 1 FXO= DN, where I want to ring.
Try this

 

[mrwhite28]

I made some progress and now do not get a second dial but I still get an error message for the UM server that states

Event Type: Warning

Event Source: MSExchange Unified Messaging

Event Category: UMService

Event ID: 1088

Date: 1/27/2009

Time: 9:50:35 AM

User: N/A

Computer: AFDCEXUM1

Description:

The IP gateway or IP-PBX "dcumipgateway.access.local" did not respond to a SIP OPTIONS request from the Unified Messaging server. The error code that was returned is "0" and the error text is ":The certificate chain was issued by an authority that is not trusted".


For more information, see Help and Support Center at

http://go.microsoft.com/fwlink/events.asp.

Can anyone help me with this issue ?

 

[Zorro2009]

What release of cs1k do you have?

 

[mrwhite28]

Its running 3.0. I was told that I have to configure the digit patterns in the voicemail section on the gateway and also program the PBX as well. Is this true ? Is anyone familiar with this setup.

 

[PhoneGuyy]

I am also working on trying to setup a MP-124 off of a CS1000M rls 5.5 and I am thinking you have to program the PBX with some virtual routes and point what numbers you want to go that way...???

 

[Wane47]

;**************
;** Ini File **
the following is ini file from working mp118. I've changed a few things to block customer idenity. Such as domain name and endpoint name. This is a sip site and uses 5 digit dialing. I made a couple of notes in quotes in it. you can copy it and upload it after you remove the notes and put in your own endpoint name and nrs domain and modify ip addresses to match yours.



;**************

;Board: MP-118 FXS
;Serial Number: 549151
;Slot Number: 1
;Software Version: 4.80A.012.010
;Board IP Address: 10.114.18.151
;Board Subnet Mask: 255.255.0.0
;Board Default Gateway: 10.114.0.21
;Ram size: 32M Flash size: 8M
;Num DSPs: 2 Num DSP channels: 8
;Profile: NONE
;------------------------------


[SYSTEM Params]

DNSPriServerIP = 10.10.10.10
SyslogServerIP = 10.1.1.89
VXMLFIleName = ''
NTPServerIP = 10.16.0.25

[BSP Params]

PCMLawSelect = 3
LocalOAMIPAddress = 10.114.18.151
RoutingTableHopsCountColumn = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

[ATM Params]


[Analog Params]

MinFlashHookTime = 100
FXSLoopCharacteristicsFilename = 'MP11x-02-1-FXS_16KHZ.dat'
CallProgressTonesFilename = 'usa_tones_stutter.dat'

[ControlProtocols Params]

MGCPDTMFDetectionPoint = 0

[MGCP Params]


[MEGACO Params]

EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0

[SS7 Params]


[Voice Engine Params]

IdlePCMPattern = 255
VoiceVolume = 1
DTMFTransportType = 2

[WEB Params]

LogoWidth = '339'

[SIP Params]

ENABLECALLERID = 1
MAXDIGITS = 19
REGISTRATIONTIME = 3600
ISPROXYUSED = 1
ISREGISTERNEEDED = 1
AUTHENTICATIONMODE = 1
ROUTEMODEIP2TEL = 1
CDRREPORTLEVEL = 1
GWDEBUGLEVEL = 5
ENABLEPROXYKEEPALIVE = 2
ENABLEEARLYMEDIA = 1
ISUSERPHONE = 0
PROXYNAME = 'nrs domain name'
SIPGATEWAYNAME = 'nrs domain name'
CNONCE = '0a123bcf'
PASSWORD = ''
RXDTMFOPTION = 0
ISPROXYHOTSWAP = 1
PROXYKEEPALIVETIME = 20
ASSERTEDIDMODE = 1
MWIANALOGLAMP = 1
MWIDISPLAY = 1
ENABLEMWI = 1
USEGATEWAYNAMEFOROPTIONS = 1
ADDTON2RPI = 0
ISFAXUSED = 1
GWREGISTRATIONNAME = 'nrs endpoint name' (put in nrs endpoint name here)
CODERNAME = g711Alaw64k,30,0,$$,0
CALLERDISPLAYINFO0 = Harris AudioCode 1,0
CALLERDISPLAYINFO1 = Harris AudioCode 1,0
CALLERDISPLAYINFO2 = Harris AudioCode 1,0
CALLERDISPLAYINFO3 = Harris AudioCode 1,0
CALLERDISPLAYINFO4 = Harris AudioCode 1,0
CALLERDISPLAYINFO5 = Harris AudioCode 1,0
CALLERDISPLAYINFO6 = Harris AudioCode 1,0
CALLERDISPLAYINFO7 = Harris AudioCode 1,0
PREFIX = 5xxxx#,*,*,0,255
SOURCENUMBERMAPTEL2IP = *,0,$$,$$,$$,$$,*,0,*
NUMBERMAPTEL2IP = 9911#,1,$$,$$,$$,$$,*,$$,*
NUMBERMAPTEL2IP = 9011*,1,813,$$,$$,$$,*,$$,*
NUMBERMAPTEL2IP = 9[2-9]*,1,811,$$,$$,$$,*,$$,*
NUMBERMAPTEL2IP = 911#,0,$$,$$,$$,$$,*,$$,*
NUMBERMAPTEL2IP = 91[2-9]*,1,812,$$,$$,$$,*,$$,*
PSTNPREFIX = 7xxxx#,1,*,*,0 (
TRUNKGROUP_1 = 1-1,56205,0
TRUNKGROUP_1 = 2-2,55817,0
TRUNKGROUP_1 = 3-3,55833,0
TRUNKGROUP_1 = 4-4,56200,0
TRUNKGROUP_1 = 5-5,88888,0
TRUNKGROUP_1 = 6-6,55552,0
TRUNKGROUP_1 = 7-7,56148,0
PROXYIP = 10.47.48.55
TRUNKGROUPSETTINGS = 1,0
;TelProfile: ProfileName, Preference, CodersGroupID, IsFaxUsed, DJBufMinDelay, JBufOptFactor, IPDiffServ, SigIPDiffServ, DtmfVolume, InputGain, VoiceVolume, EnableReversePolarity, EnableCurrentDisconnect, EnableDigitDelivery, ECE, MWIAnalog, MWIDisplay, FlashHookPeriod, EnableEarlyMedia, ProgressIndicator2IP
TELPROFILE_1 = Default Tel Profile,1,0,1,70,7,46,46,-11,0,1,0,0,0,1,1,1,400,1,0
;IpProfile: ProfileName, Preference, CodersGroupID, IsFaxUsed, DJBufMinDelay, JBufOptFactor, IPDiffServ, SigIPDiffServ, SCE, RTPRedundancyDepth, RemoteBaseUDPPort, CNGmode, VxxTransportType, NSEMode, IsDTMFUsed, PlayRBTone2IP, EnableEarlyMedia, ProgressIndicator2IP
IPPROFILE_1 = Default Ip Profile,1,0,1,70,7,46,46,0,0,0,0,2,0,0,0,1,0

[VXML Params]


[IPsec Params]


[Audio Staging Params]


[PSTN-SDH Params]