Aud 422

[mars1947]

I am receiving AUD422 message:
AUD422 00108538 00000407 00000003 0000159C 00000001 00002811 4518 NULL

I have outed the number, but I still get the AUD422, I have changed the TN that 00002811 is pointing to, but I still get the AUD422. Any suggestions?

 

[acewarlock]

Does this happen all day long?

 

[mars1947]

Once a minute, all day

 

[acewarlock]

is it the same exact AUD422 or does it change?

 

[mars1947]

Same message all day

 

[acewarlock]

If it was me I would do an INI at the end of the day, it takes about 20 Sec. I have an Option 11C with 400 Users on it and it onlt takec 9 SEC for mine to INI and it will only effect new callers trying to make a call for a few Sec.

 

[mars1947]

I have a scheduled change out of one of the fibers soon, we'll be turning the switch off and on then, that should do it. Thank you for your help.

 

[HASAGO]

LD 32
.CONV 159C

This will give you the TN causing the constant AUD422 error message. If you trace this TN you will find that it is sitting there in REORDER state. Simply disable the TN then re-enable and the error should stop - for the time being anyway. If the error cntinues to start again after a period of time try changing the below MPO settings:

RGNA STD STD
AOCS DIS DIS

I have had this same issue at several of my sites and once the MPO settings were changed to the above the problem has never occured again. Good luck.