Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

at command for modem

Status
Not open for further replies.
3435

3435

Programmer
Joined
May 14, 2002
Messages
4
Location
TW
I try to command AT command to Modem through com port.
The modem could receive any at commands in whatever baud setting in com port.
How can it do?
minfu889@hotmail.com
 
Sort by date Sort by votes
Depends what you're trying to command the modem to do... If you have Windows Hyperterminal installed, you should be able to issue AT commands from that screen. Type AT&F and hit ENTER, and you should get an "OK" response from the modem.


ROGER - GØAOZ.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

adrianoalves78
  • Locked
  • Question Question
Microsoft Teams Skype for Business
Replies
0
Views
638
adrianoalves78
adrianoalves78
OzzieGeorge
  • Locked
  • Question Question
Modems over SIP
Replies
2
Views
724
2600hz
2600hz
stoobiedoo
  • Locked
  • Question Question
Windows 10 softmodem will only connect at 2400
Replies
1
Views
613
LoPath
LoPath
Samantha99224
  • Locked
  • Question Question
USRobotics 3453C modem Terminal Interface issue
Replies
0
Views
475
Samantha99224
Samantha99224
LOKIDOG
  • Locked
  • Question Question
Hayes Modem Won't Install on XP (SOLVED)
Replies
1
Views
507
LOKIDOG
LOKIDOG

Part and Inventory Search

Sponsor

Back
Top