Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AssemblyInfo.cs 1

Status
Not open for further replies.
jamert

jamert

Programmer
Joined
Dec 9, 2007
Messages
80
Location
CA
Is there a parameter one can set in the assemblyInfo that restricts the usage to a specific Project or domain? thanks
 
Sort by date Sort by votes
No.

What are you trying to do?

Chip H.


____________________________________________________________________
If you want to get the best response to a question, please read FAQ222-2244 first
 
Upvote 0 Downvote
Take a look to PermissionSetAttribute class at the Assembly level. You can use it combined with security code access set in the machine.config.
obislavu
 
Upvote 0 Downvote
Sounds like they're trying to implement a licensing scheme, where they sell an assembly to someone as part of a product, and want to make sure the customer doesn't call directly into the assembly themselves.

But I could be wrong.

Chip H.


____________________________________________________________________
If you want to get the best response to a question, please read FAQ222-2244 first
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top