Aria Soho

[cristian79]

Hello.
I have an ARIA SOHO AR-BKSU with LDP-7224D.
I cannot forward a call from a station to another.
Even if in programming mode PGM111 (station attributes) it is set call forward ON for all stations, during an internal call (STA105 call STA109) when I press "R" (flash) I get the tone on 109 to call another station but 105 is cut off.
Another exemple is for FWD situation: from DKT all calls are unconditional forwarded to STA106 and when 106 tries to give the call to another station (by pressing "R" and station number) the call connection is lost.
Where and what should I check about this?
Please help!

Thank you.

 

[AngryPBXAdmin]

Are you trying to transfer a call or set a handset to call forward?

 

[cristian79]

I'm trying to transfer a call from a normal station to another (with "R" button / flash button), during the conversation between them.
Before changing the old Panasonic with Aria Soho it was possible to do that very simple: during a conversation between two stations when I was pressing "R" (flash) the tone heard and the other station was put on hold until the first one close the connection...

 

[cristian79]

It's done!
I had to configure SLT Maximum and Minimum Hook Flash Timer: PGM 182 (FLEX2 & FLEX3).
I put 5ms - 100ms and now I can transfer a call between stations.
Thank you all anyway